THERMOCUBE II 200-650W THERMOELECTRIC CHILLER MANUAL 52-14790-1
SOLID STATE COOLING SYSTEMS, 167 MYERS CORNERS ROAD, WAPPINGERS FALLS, NY 12590 32
TELEPHONE: (845) 296-1300, FAX: (845) 296-1303, WEB: WWW.SSCOOLING.COM VERSION M2
7.5 OTHER OPTIONS
-AF: Air Filter Option
The air filter option adds a filter to the ThermoCube II air inlet. This
option is recommended for environments with high levels of
airborne contaminants such as dust or animal hair as these
contaminants can stick to the internal air heat sinks, reducing
efficiency and cooling capacity.
-C: Copper Cold Plate Option
It is very important to match the wetted metals of the system the
ThermoCube II is controlling, to minimize any risk of corrosion. If
your system uses any copper or brass parts, we recommend the "-C"
option to match wetted metals. Note that cooling capacity will be
degraded by as much as 15-20% with this option, depending on
configuration.
To Next Page
Loading...
