THERMOCUBE II 200-650W THERMOELECTRIC CHILLER MANUAL 52-14790-1
SOLID STATE COOLING SYSTEMS, 167 MYERS CORNERS ROAD, WAPPINGERS FALLS, NY 12590 35
TELEPHONE: (845) 296-1300, FAX: (845) 296-1303, WEB: WWW.SSCOOLING.COM VERSION M2
-SS: Stainless Steel Plumbing and Tank Option
With this option the standard tank and plumbing are replaced with all
stainless steel tank and plumbing. Note: This configuration option
is only available with gear pumps.
-ST: Stainless Steel Tank Option
With this option the standard tank is replaced with a stainless steel
tank.
-VD: Vibration Dampening Option
This option adds vibration dampening material to interior sheet metal
surfaces for applications such as scanning electron microscopes that
are highly sensitive to vibrations from pumps and fans. This option
is usually combined with the –EF external filer option which
dampens vibrations in the coolant flow.
-FM: Flow Meter Option
This option adds a 0.3 to 10.0 lpm flow meter and reports the coolant
flow rate on the front display and via remote communications.
-LD: Leak Detect Option
This option adds an optical leak detector and sealed dam under the
plumbing section, triggering a fault if any coolant is detected.
SECTION 8
CLEANING YOUR CHILLER ________________________________________
The exterior surfaces of the ThermoCube II may be cleaned with a
non-shedding wipe dipped in isopropyl alcohol.
SECTION 9
TECHNICAL SUPPORT ____________________________________________
Delighting our customers is our highest priority. Please contact us
immediately for technical assistance whenever you have questions
or concerns.
Hours: 8 a.m. to 5 p.m. Eastern Time, Monday - Friday
Telephone: (845) 296-1300
Fax: (845) 296-1303
E-mail: techsupport@sscooling.com
To Next Page
Loading...
