Solid State Logic SSL UC1 User Manual

Product Overview & Features
16
SSL UC1 User Guide
Bus Compressor Meter
The most striking aspect of the UC1 front panel is the inclusion of a genuine moving-
coil gain reduction meter. This shows the gain reduction activity of the selected Bus
Compressor 2 plug-in. The meter is driven digitally from the plug-in and provides a
helpful way of being able to keep an eye on compression activity, even with the Plug-in
GUI closed.
SOLO and CUT Buttons
The SOLO and CUT buttons apply to the selected Channel
Strip 2 instance being controlled by UC1.
SOLO - will cut the output of all other Channel Strip 2 plug-
ins in the DAW session, unless they are solo safed (see
Plug-in section on solo safe'ing).
CUT - will cut the output of the selected Channel Strip 2
plug-in.
SOLO CLEAR - will clear any active Channel Strip 2 solos.
The SOLO, CUT and SOLO Clear buttons do not control the DAW's mixer solo and mute buttons.
FINE Button
FINE - puts all front panel Channel Strip and Bus Compressor rotary controls into a finer resolution, for mix critical tweaks. This can
be latched or held for a momentary action.
The Bus Compressor meter
SOLO, CUT and FINE controls in the bottom-right of UC1

Solid State Logic SSL UC1 Specifications

General

Brand	Solid State Logic
Model	SSL UC1
Category	Recording Equipment
Language	English