Solid State Logic UF8 User Manual

Studio One Tutorial
72
SSL UF8 User Guide
Setting Up Plug-In Control
1. Open up a plug-in you want to configure to be controlled by UF8's V-Pots and click the cog near the top-right.
2. Click the small down arrow near the top-left and make sure 'Recently Touched' is ticked from the drop-down list.
3. Click the small down arrow across to the right and select 'Control' from the drop-down list.
Click the cog
Click the down arrow
Click the down arrow
Tick 'Recently Touched'
Select 'Control'

Solid State Logic UF8 Specifications

General

Brand	Solid State Logic
Model	UF8
Category	Recording Equipment
Language	English