Plug-in Mixer Tutorial
84
SSL UF8 User Guide
V-Pot Assignments
All the parameters of the Channel Strip and Bus Compressor plug-ins that are assignable to the
V-Pots, can be selected using the Soft Keys along the top of UF8.
Use the SOFT KEY bank buttons (V-POT, 1, 2, 3, 4 and 5) to locate the bank that contains the
parameter you want to control on the V-Pots and then press the corresponding soft key to assign
it to the V-Pots.
Remember, if you have Selected parameter follows UC1/Plug-in Mixer, the Channel Strip or
Bus Compressor parameter assigned across the V-Pots will still change automatically in response
to the parameter being moved/actioned in the Plug-in Mixer, on UC1 or in the Plug-in itself.
SOFT KEY Bank Assignments - Channel Strip Mode
V-POT Bank
Bank 1
Bank 2
Bank 3
The parameters are spread
across the SOFT KEY banks
To Next Page
Loading...
