Sonel MIC-5010 - Page 25

MIC-5010, MIC-5005 – USER MANUAL
21
Press the MENU button to go to the limit setting.
For R
CONT
the limit is the minimum value. The setting limit reflects the function: from 0.01 Ω to 999
Ω. The value of the limit set in the same way as for R
ISO
.
To deactivate the limit (displayed symbol ---) press the button while in the 1 kΩ position or the
button while in the 999 Ω position.
Connect the meter to the tested object. Trigger the
measurement by pressing the START push-button.
Read out the result.