Sonel MIC-5010 - Page 34

MIC-5010, MIC-5005 – USER MANUAL
30
3. Connect Bluetooth module to the USB socket of the PC, unless it is integrated into the PC.
4. During the process of pairing the meter with a PC enter PIN code compatible with the PIN code of the
meter defined in main settings..
5. On the computer start data storing programme.
Note:
Standard pin for Bluetooth is "0123".
- The data transmission may be interrupted using the ESC button - the meter then enters the memory
viewing mode.
- With the USB cable active the wireless transmission is not possible.