Adjusting the image settings
Resetting the input levels
Reset all input levels parameters back to default.
1. Select Menu > Image Settings > Input Levels > Reset to Default.
2. Press ENTER.
Configuring picture settings
Depending on display content, choose the most suitable picture settings. Different picture settings
have different color temperature, brightness, and so on.
1. Select Menu > Image Settings > Picture Settings.
2. Select the appropriate picture setting:
•
Video—Used for theater application. It sets the color temperature to 6300K with 60% of
maximum brightness.
•
Bright—Used for large size or high brightness application. It sets the color temperature
to 7500K with 100% brightness.
•
Enhanced—Used for images with richly saturated and vivid color. It is based on
brightness mode.
•
REC709—Used for high-definition television. It sets the color temperature to 6500K with
80% of the maximum brightness.
•
DICOM SIM—Used for high contrast content, such as X-ray diagram. It sets the color
temperature to 7500K with 100% brightness.
•
Blending—Used for multiple projector application. It sets the color temperature to
7500K with 90% of maximum brightness.
•
HDR—Displays High Dynamic Range (HDR) content.
•
3D—Plays 3D videos.
•
2D High Speed—Displays 2D input signal at 120Hz.
•
User—Customized picture setting. See User configuration on page 37 for more details of
creating a customized picture setting.
3. To confirm the selection, press ENTER.
To Next Page