SONNOC SNP-LU850E - Adjusting the White Peaking; Adjusting the Color Temperature; Adjusting the Color Wheel Speed; Save and Restore User Data

Adjusting the image settings
Sonnoc User Manual
40
Adjusting the white peaking
Use white peaking to adjust the color of white. The maximum value of white peaking, 100, can
increase the brightness of white to near 100%.
1. Select Menu > Image Settings > Advanced Image Settings > White Peaking.
2. Adjust the slider by arrow keys or press ENTER to input the value.
3. Press ENTER.
Adjusting the color temperature
Adjust the color temperature as expressed in degrees Kelvin.
1. Select Menu > Image Settings > Advanced Image Settings > Color Temperature.
2. Select appropriate color temperature:
• Warmest—Set the color temperature to 5500K.
• Warm—Set the color temperature to 6500K.
• Cool—Set the color temperature to 7500K.
3. Press ENTER.
Adjusting the color wheel speed
Adjust the color wheel speed, which affects the projector’s noise level, lifetime, and eliminates the
rainbow phenomenon.
The color wheel speed adjustment is available only for DWU960-iS and DWU960ST-iS.
1. Select Menu > Image Settings > Advanced Image Settings > Color Wheel Speed.
2. Select appropriate color temperature:
• 2X—Increase the projector’s lifetime and reduce the noise level.
• 3X—Eliminate the rainbow phenomenon.
3. Press ENTER.
Save and Restore user data
User can save the projector settings as user data and reload the settings later.
1. Select Menu > Image Settings > Advanced Image Settings > Backup Restore.
• Save—Save all of the projector settings as user data. User can save up to five records.
• Restore—Load the previously saved user data.