SONNOC SNP-LU850E - Adjusting IR Control Settings; Setting 12 V Trigger; Setting Audio Settings

Configuring system settings
Sonnoc User Manual
47
Adjusting IR control settings
Choose IR control setting from top, front and HDbaseT.
1. Select Menu > Configuration > IR Control.
2. Select to turn on or off IR control from top, front and HDbaseT.
3. To confirm the selection, press ENTER.
Setting 12V trigger
When enabled, the projector screen is automatically raised or lowered when the projector is turned
on or off. This function only works when the projector is connected to an electrical projector screen.
1. Select Menu > Configuration > 12V Trigger.
2. Select to turn on or off 12V trigger.
3. To confirm the selection, press ENTER.
Setting audio settings
Control audio settings.
1. Select Menu > Configuration > Audio Settings.
2. Select to audio mute or adjust the volume.
3. To confirm the selection, press ENTER.