SONNOC SNP-LU850E - Determining the On-Screen Display Position; Showing Messages; Setting the Transparency of the On-Screen Display Position; Changing the Splash Screen

Configuring system settings
Sonnoc User Manual
44
Determining the on-screen display position
Adjust the location of the on-screen display (OSD) menus.
1. Select MENU > Configuration > Menu Preferences > Menu Horz Offset or Menu Vert
Offset.
2. To determine the location on the screen where you want OSD to appear, adjust the slider by
arrow keys or press ENTER to input the value.
3. After inputting the value, press ENTER to apply.
Showing messages
Enable or disable the on screen message dialogs. For example, input source, IP Address, Slot
information, Gamma information, and so on.
1. Select Menu > Configuration > Menu Preferences > Show Messages.
2. To swap, press ENTER.
Setting the transparency of the on-screen display position
Change the on-screen display (OSD) menus background to be transparent. As the value increases,
more of the image behind the menu is visible.
1. Select MENU > Configuration > Menu Preferences > Menu Transparency.
2. Adjust the slider by arrow keys or press ENTER to input the value.
3. After inputting the value, press ENTER to apply.
Changing the splash screen
Select splash screen which is the screen with no source is displayed.
1. Select Menu > Configuration > Menu Preferences > Splash Screen Setup.
2. Select the appropriate splash screen:
• Factory Logo
• Blue
• Black
• White
3. Press ENTER.
Setting time out for on-screen display
Adjust the time for on-screen display to disappear.
1. Select Menu > Configuration > Menu Preferences > Menu Time Out.
2. Select the appropriate time: