Sonos Beam Product Guide

Sonos Beam
15
Turn the speaker on or off
Your Sonos speakers are designed to stay on; they use minimal electricity when not in use.
• To stop the music in one room, touch on the speaker (or use the app).
• To stop the music everywhere, tap > Pause All in the app.
Troubleshooting
Warning: Do not open the product as there is a risk of electric shock. Under no circumstances should the
product be repaired by anyone other than an authorized Sonos repair center, as this will invalidate
the warranty. Please contact Sonos Customer Support for more information.
Customer Support
• Visit our website at www.sonos.com/support
• Email us at support@sonos.com
Speaker not detected during setup
• Make sure your system is updated to the current software.
• Insert the power cord fully into the home theater speaker and your power source.
• Move speaker closer to your router.
Can’t turn off TV’s speakers
If you’re using the optical adapter, during setup you’ll turn off your TV’s speakers. Refer to your TV owner’s
guide for more information.
If you can’t turn them off,
1. Use the TV’s volume buttons to turn the volume completely down. Do not use the Mute button.
2. Use only the volume buttons on your Sonos app to adjust the volume.
Turn off volume control messages
Some TVs may show volume control messages when you adjust the volume, even after you turn off your TV
speakers. (If you have Beam, this happens if it’s connected to your TV using the optical adapter.)
You may be able to program your remote control to turn off these messages.
1. Program a device key.
• Refer to your remote control’s instructions or the cable box’s on-screen help.
• Contact your cable service provider for more help.
2. In the code list, search for the Sonos code.
• If Sonos doesn’t appear, select a code other than that of your TV and its connected devices.
• DO NOT initiate an automated search for a code.
3. Lock the volume control to your home theater speaker.
Note: This feature is sometimes referred to as volume lock or volume punch.

Sonos Beam Specifications

General

Disc types supported	-
Optical disc player type	Not included
RMS rated power	- W
Audio output channels	4.0 channels
Audio Return Channel (ARC)	Yes
Product color	Black
Built-in display	No
Virtual assistant	Amazon Alexa & Google Assistant
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless

Weight and Dimensions

Depth	100 mm
Width	651 mm
Height	68.5 mm
Soundbar weight	2800 g