Sonos Beam
3
Connect the cables
Before you start
1. Disconnect existing home theater or surround sound equipment from your TV.
2. Connect any external devices, such as a cable box or DVD player, directly to your TV.
Connect the power cord
1. Insert the power cord firmly into Beam’s AC (mains) power port until it is fully connected.
2. Plug the other end of the power cord into an AC (mains) power source.
Caution: Use only the supplied power cord (using a third-party power cord will void your warranty).
Connect Beam to your TV
Use the HDMI cable to connect the soundbar to your TV. You may need the optical adapter too (the app lets
you know).
1. Fully insert the HDMI cable into Beam’s HDMI port.
2. Connect the HDMI cable to your TV. You have two choices:
• If your TV has an HDMI ARC port, connect the HDMI cable directly to the TV’s HDMI ARC port.
• If your TV doesn’t have an HDMI ARC port, attach the optical adapter to the HDMI cable and connect
it to the TV’s optical digital OUT port.