Sonos Beam - Wall Mounting Instructions; Wall Mount Guidelines; Mount Kit Contents

Sonos Beam
5
If your TV doesn’t have an HDMI ARC port
You’ll need the optical adapter.
1. Remove the protective cap from the optical adapter.
2. Attach the optical adapter to the HDMI cable.
3. Connect the optical adapter to the TV’s optical digital OUT port.
Note: The optical adapter’s port is “D-shaped”—make sure the connector aligns correctly into the port.
Inserting the adapter incorrectly may damage the cable.
Optical adapter
HDMI cable
Remove the protective cap
TV’s optical digital OUT port
Beam’s HDMI port
Optical adapter attached to HDMI cable