A6T/A6/A5 Portable Ultrasonic Diagnostic System
4701-0040-01A
1
Caution
This manual contains necessary information to operate the system safely.
Please read this manual before attempting to use the system.
This system has been designed with safety consideration of the operators
and the patients. However, to ensure the system reliability and safety, please
pay attention to the following:
z This system shall be operated only by or under the guidance
of a qualified person.
z This system complies with Type B general equipment, Class
I of EN606601-1:1990+A1:1993+A2:1995 standard.
z Do not modify this system in any way. Necessary
modifications can be made only by the manufacturer or its
designated agents.
z This system is fully adjusted at the factory. Do not adjust
any fixed adjustable parts.
z In the event of a malfunction, turn off the power supply
immediately and inform the manufacturer or its designated
agents.
z The power cable of the system must be connected to a
grounded power socket. Do not remove the ground cable for
any reason.
z Only the devices comply with
EN606601-1:1990+A1:1993+A2:1995 standard can be
connected with the system, either electronically or
mechanically. Recheck the leakage current and other safety
performance indices of the entire system to avoid potential
system damage caused by leakage from a current
superposition.
z The system has no any specialized design when it is
configured with high-frequency operation devices. The
operator shall use caution in these types of applications.
To Next Page
Loading...
Need help?
General
