To Next PageTo Next Page
Need help?Do you have a question about the Sonoscape SSI-6000 and is the answer not in the manual?
General| Display | 15 inch LCD |
|---|---|
| Image Modes | Color Doppler, Power Doppler |
| Power Supply | AC 100-240V, 50/60Hz |
| Applications | Abdominal, Obstetrics, Gynecology, Cardiac, Vascular, Small parts |
| Imaging Modes | Color Doppler, Power Doppler |
Discusses measures to ensure the safety of both the operator and patient.
Provides guidelines for safe operation and patient scanning.
Details procedures for safely moving and transporting the ultrasound system.
Describes the components and setup of the ultrasound system.
Lists supported transducers and other compatible accessories.
Explains the basic principles and user interface of the system.
Instructions for connecting ultrasound probes to the system.
Step-by-step guide for powering on and starting the ultrasound system.
Procedure for initiating an ultrasound diagnosis session.
Explains how to access and use the system's configuration and information menus.
Covers the configuration of various system parameters and settings.
Details the configuration for digital imaging and communication protocols.
Details the operational parameters and adjustments for real-time B mode imaging.
Explains how to capture, review, and save image sequences in B mode.
Describes the THI technique for improved image quality.
Covers the operational parameters and settings for CDI mode.
Explains how to capture, review, and save image sequences in CDI mode.
Details the operational parameters and settings for DPI mode.
Explains how to capture, review, and save image sequences in DPI mode.
Covers the operational parameters and settings for TDI mode.
Explains how to capture, review, and save image sequences in TDI mode.
Details operations and adjustments when M trace is inactive.
Details operational parameters and adjustments when M trace is active.
Explains how to capture, review, and save image sequences in M mode.
Covers the operational parameters and settings for Pulsed Wave (PW) Doppler.
Details the operational parameters and settings for Continuous Wave (CW) Doppler.
Explains how to capture, review, and save spectral Doppler image sequences.
Guide on acquiring 2D images and activating 3D mode.
Details the various operations and adjustments for 3D mode imaging.
Instructions for activating real-time 3D volume display.
Covers operations for 4D mode, including sample box and quality adjustments.
Provides information on supported transducers and their intended applications.
Details the procedures for cleaning and disinfecting ultrasound probes.
Information on contacting service personnel for system malfunctions.
Provides contact details for inquiries and service.
