SSI-6000/SSI-5800/SSI-5500/SSI-5500BW
Digital Color Doppler Ultrasound System
Chapter 14
System Maintenance
We recommend the user to perform the following maintenance operations:
• Clean the probes and probe holders daily to remove coupling gel, dust, and
etc.
• Clean the system (keyboard, monitor, and etc.) regularly.
Attention!
• Switch the system off before cleaning.
• Damp cloth soaked in mild soap water is allowed.
• Protect the system, especially the electric parts, from drip
water.
• Do not apply acetone/alchohol or use abrasives on the
system or the transducer surfaces.
Contents
14.1 Guidance for Service . . . . . . . . . . . . . . . . . . . . . . . . 14-1
14.2 Manufacturer Responsibility . . . . . . . . . . . . . . . . . . . . 14-2
14.3 Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . 14-2
14.1 Guidance for Service
In case of any malfunctions, turn off the system and disconnect the power supply.
Contact your SonoScape representative for service. Mention the detailed phenom-
ena of the malfunction to the service personnel to help the identification of cause.
Warning!
There are no user replaceable parts inside the system. Any
kind of do-it-yourself repairs invalidate the warranty. Contact
your representative for service instead.
Regular system check, which shall be performed once every year by authorized
service personnel, is recommended. Consult your representative for more details.
P/N: 4701-0061-01B
14-1
To Next Page
Loading...
Need help?
General
