Sontex Supercal 5 - Communication and Cooling Features; Optional Communication Modules; Cooling Liquid Usage Notes; Display Navigation Sequence

15Installation guide | Supercal 5
EN
Communication options
The Supercal 5 can be tted with up to two different optional communication
modules. The optional communication modules can be equipped afterwards,
without damaging the verication. The optional modules have no inuence
on the veried relevant part in the cover of the inte-grator unit. At the latest
6 seconds after the installation, the calculator unit recognizes the plugged-in
optional modules and the functions are freely available. When connecting the
communication modules, the installation guidance - supplied with the unit - is
to be considered.
Cooling liquids (Glycols)
In the calculator Supercal 5 more than 70 cooling liquids are programmed and
many additional mixtures can be specied by software.
The feature of the calculator Supercal 5 for cooling applications with cooling
liquids water mixtures is exclusively to be used with the ow sensor Superstatic
440 (Not to be used with mechanical ow sensors).
The feature cooling liquid (Glycol) water mixture is enabled with the Superprog
windows and Superprog android.
Note: If cooling liquids are used, the calculator or thermal energy meter loses
its MID approval.
Display
The calculator Supercal 5 has the following display sequence:

Main menu (Billing relevant data)

Metrological

Conguration

Service

Test Radio