Sontex Supercal 5 - Superstatic 440 Flow Sensor Technical Data

34 Installation guide | Supercal 5
Technical Data Flow Sensor Superstatic 440
qp Threaded
connection
Flanged
connection
Length Mat. PN Maximal
ow qs
Minimal
ow qi
Low ow thres-
hold value (50°C)
Threaded hole
for sensor
Weight
(*) (**)
Kvs value
(at 20°C)
Pressure
loss at qp
m
3
/h G" DN mm PN m
3
/h l/h l/h kg m
3
/h bar
(EN ISO 228-1) (ISO 7005-3)
1 3/4" (15) 110 Brass 16/25 2 10 4 Yes 2,9 2,09 0,20
1 1" (20) 190 Brass 16/25 2 10 4 Yes 3,2 2,09 0,20
1,5 3/4" (15) 110 Brass 16/25 3 15 10 Yes 2,9 2,06 0,25
1,5 1" (20) 190 Brass 16/25 3 15 10 Yes 3,2 5,44 0,09
2,5 1" (20) 190 Brass 16/25 5 25 10 Yes 3,2 5,21 0,25
3,5 1 1/4" (25) 260 Brass 16/25 7 35 15 Yes 3,5 7,46 0,16
3,5 25 260 Brass 16/25 7 35 15 5,4 7,46 0,16
6 1 1/4" (25) 260 Brass 16/25 12 60 30 Yes 3,5 13,4 0,16
6 25 260 Brass 16/25 12 60 30 5,4 13,4 0,16
10 2" (40) 300 Brass 16/25 20 100 50 Yes 4,5 20,9 0,25
10 40 300 Brass 16/25 20 100 50 8 20,9 0,25
(ISO 7005-1)
15 50 270 SS/CI 16/25 30 150 75 9,1 31,6 0,25
25 65 300 SS/CI 16/25 50 250 125 11,2 51,8 0,25
40 80 225 SS 16/25 80 800 400 14,4 142 0,09
40 80 300 SS/CI 16/25 80 800 400 13,1 142 0,09
60 100 250 SS 16/25 120 1,200 600 NA 210 0,10
60 100 360 SS/CI 16/25* 120 1,200 600 19 210 0,10
100 125 250 SS/CI 16/25* 200 2,000 1,000 NA 343 0,10
150 150 300 SS/CI 16/25* 300 3,000 1,500 27, 2 514 0,10
150 150 500 SS 16/25 300 3,000 1,500 NA 514 0,10
250 200 350 SS 16/25 500 5,000 2,500 NA 857 0,10
400 250 450 SS 16/25 800 8,000 4,000 38,1 1,372 0,10
Brass : Messing, SS: Stainless Steel; CI: Spheroidal cast iron, *: PN 25 only SS
(*) Weight Value indicated only for the heaviest material.
(**) Weight corresponding only for the owmeter with 3mts cable.
NA : not available
m
3
/h m
3
/h m
3
/h
800 350 500 Steel 10/16
1,600 32 16
90/105 2,667 0,10
1,500 500 500 Steel 10/16 3,000 60 30 130/195 5,000 0,10
Steel : Stah