Sony a7CII User Manual

Help Guide
Interchangeable Lens Digital Camera
ILCE-7CM2 α7CII
Zebra Display
Sets a zebra pattern, which appears over part of an image if the brightness level of that part meets the IRE level that you
have set. Use this zebra pattern as a guide to adjust the brightness.
Menu item details
Zebra Display:
Sets whether to display the zebra pattern. ([Off] / [On])
Zebra Level:
Adjusts the brightness level of the zebra pattern. ([70] / [75] / [80] / [85] / [90]/ [95] / [100] / [100+])
Hint
You can register values to check the correct exposure or overexposure as well as the brightness level for [
Zebra Level]. The
settings for correct exposure confirmation and overexposure confirmation are registered to [Custom 1] and [Custom 2]
respectively in the default settings.
To check the correct exposure, set a standard value and the range for the brightness level. The zebra pattern will appear on
areas that fall within the range you set.
To check the overexposure, set a minimum value for the brightness level. The zebra pattern will appear over areas with a
brightness level equal to or higher than the value you set.
Note
The zebra pattern is not displayed on devices connected via HDMI.
TP1001164906
5-054-865-11(1) Copyright 2023 Sony Corporation
MENU →
(Exposure/Color) → [Zebra Display] → Select a menu item and set the desired parameter.
1
216

Sony a7CII Specifications

General

Effective Megapixels	33.0 MP
ISO Sensitivity	100-51200 (expandable to 50-204800)
Autofocus System	Fast Hybrid AF (phase-detection AF / contrast-detection AF)
Image Stabilization	5-axis in-body image stabilization
Continuous Shooting	Up to 10 fps
Dimensions	124.0 x 71.1 x 63.4 mm
Image Processor	BIONZ XR
Sensor Type	Full-frame CMOS
Video Recording	4K 60p
Viewfinder	0.39-type electronic viewfinder
LCD Screen	3.0-inch vari-angle touchscreen
Connectivity	Wi-Fi, Bluetooth, USB Type-C
Weight	514 g (with battery and memory card)
Memory Card Slots	1 (SD/SDHC/SDXC, UHS-II compatible)