Sony a7CII User Manual

Help Guide
Interchangeable Lens Digital Camera
ILCE-7CM2 α7CII
Touch Pad Settings
You can adjust settings related to touch pad operations during viewfinder shooting.
Menu item details
Operation in Vertical Orientation :
Sets whether to enable touch pad operations during vertically oriented viewfinder shooting. You can prevent erroneous
operations during vertically oriented shooting caused by your nose, etc. touching the monitor.
Touch Position Mode:
Sets whether to move the focusing frame to the position touched on the screen ([Absolute Position]), or move the
focusing frame to the desired position based on the direction of dragging and the amount of movement ([Relative
Position]).
Operation Area:
Sets the area to be used for touch pad operations. Restricting the operational area can prevent erroneous operations
caused by your nose, etc. touching the monitor.
About Touch Positioning Mode
Selecting [Absolute Position] lets you move the focusing frame to a distant position more quickly because you can
directly specify the position of the focusing frame with touch operations.
Selecting [Relative Position] lets you operate the touch pad from wherever is easiest, without having to move your finger
over a wide area.
Hint
MENU →
(Setup) → [Touch Operation] → [Touch Pad Settings] → desired setting.
1
296

Sony a7CII Specifications

General

Effective Megapixels	33.0 MP
ISO Sensitivity	100-51200 (expandable to 50-204800)
Autofocus System	Fast Hybrid AF (phase-detection AF / contrast-detection AF)
Image Stabilization	5-axis in-body image stabilization
Continuous Shooting	Up to 10 fps
Dimensions	124.0 x 71.1 x 63.4 mm
Image Processor	BIONZ XR
Sensor Type	Full-frame CMOS
Video Recording	4K 60p
Viewfinder	0.39-type electronic viewfinder
LCD Screen	3.0-inch vari-angle touchscreen
Connectivity	Wi-Fi, Bluetooth, USB Type-C
Weight	514 g (with battery and memory card)
Memory Card Slots	1 (SD/SDHC/SDXC, UHS-II compatible)