Help Guide
Interchangeable Lens Digital Camera
ILCE-7CM2 α7CII
HDMI Output Settings (movie)
Sets the video and audio to be output to an external recorder/player connected via HDMI when shooting a movie.
Use a Premium High Speed HDMI Cable (sold separately) to output 4K movies.
Menu item details
Rec. Media dur HDMI Output:
Sets whether or not to record movies on the memory card of the camera during HDMI output.
[On]: Records movies on the memory card of the camera, and outputs the movies to the HDMI-connected device at the
same time. The color depth for the output movie is based on [Record Setting] under [
Movie Settings].
[Off(HDMI Only)]: Does not record movies on the memory card of the camera, and outputs movies only to devices
connected via HDMI.
Output Resolution:
Sets the resolution of the image that will be output to another device connected via HDMI when [Rec. Media dur HDMI
Output] is set to [On]. ([Auto] / [2160p] / [1080p] / [1080i])
4K Output Set.(HDMI Only):
Sets the frame rate and color depth of 4K movie output to another device connected via HDMI when [Rec. Media dur
HDMI Output] is set to [Off(HDMI Only)]. ([60p 10bit] / [50p 10bit] / [30p 10bit] / [25p 10bit] / [24p 10bit])
Time Code Output:
Sets whether or not to output the time code and user bit to another device connected via HDMI. ([On] / [Off])
Time code information is transmitted as digital data, not as an image displayed on the screen. The connected device can
then refer to the digital data in order to recognize the time data.
REC Control:
Sets whether to start or stop recording on the external recorder/player remotely by operating the camera when the
camera is connected to an external recorder/player. ([On] / [Off])
4ch Audio Output:
When recording audio in 4 channels, set the combination of audio channels that will be output to other devices
connected via HDMI.
[CH1/CH2]: Outputs audio from channel 1 to the L (left) side and from channel 2 to the R (right) side.
[CH3/CH4]: Outputs audio from channel 3 to the L (left) side and from channel 4 to the R (right) side.
Hint
With [REC Control] set to [On],
(STBY) is displayed when a recording command is ready to be sent to the external
recorder/player, and
(REC) is displayed when a recording command is being sent to the external recorder/player.
Even when playing back a movie with 4 channels on a device connected to the HDMI terminal of the camera, the audio is output
with the [4ch Audio Output] setting.
Note
When [Rec. Media dur HDMI Output] is set to [Off(HDMI Only)], [HDMI Info. Display] becomes temporarily set to [Off].
When [Rec. Media dur HDMI Output] is set to [Off(HDMI Only)], the counter does not move forward (the actual recording time is
not counted) while the movie is being recorded on an external recorder/player.
Regardless of the [Output Resolution] setting, the HDMI output resolution will be 1080 in the following cases.*
When [Log Shooting] under [Log Shooting Setting] is set to an item other than [Off]
MENU →
(Setup) → [External Output] → [ HDMI Output Settings] → desired setting item.
1
To Next Page
Loading...
Need help?
General
