Framing Tracking Speed:
Sets the subject tracking speed for camera-work. (1 to 5)
Movie Rec/Streaming:
Sets whether the images recorded on the memory card and the images output via USB streaming are auto-framed
images or full-angle images. ([Crop]/[Do not crop])
When [Crop] is selected, auto-framed images are recorded or streamed.
HDMI Output:
Sets whether the images output to HDMI are auto-framed images or full-angle images. ([Crop]/[Do not crop])
When [Crop] is selected, auto-framed images are output.
Hint
The auto-framing function performs camera-work by cropping the 4K-resolution image. When using the auto-framing function, it is
recommended that you set [
File Format] to HD image quality in order to prevent deterioration of image quality.
When setting the shutter speed manually and shooting with auto framing, it is recommended that you set a faster shutter speed
to reduce blurring of the subject.
When [
Focus Area] is set to [Wide], the subject is recognized and framed. When it is set to [Spot], framing is performed
around the spot frame. You can also change the cropping position by moving the spot frame during shooting.
By using the smartphone application Creators' App, you can check the framing status and perform touch operations even at a
distance from the camera.
For more information about how to use Creators' App, refer to the following support page.
https://www.sony.net/ca/help/opr/
Note
Auto-framing is available only in the movie recording mode.
Even when [Auto Framing] is set to [On], the monitor always displays image in the full angle of view, and a frame indicating the
cropping area is displayed during auto-framed shooting.
If there are multiple recognized subjects, only the subject with the highest priority will be targeted.
Depending on the settings for [
File Format] and [ Movie Settings], the angle of view may change when [Auto Framing] is
set to [On].
TP1001173391
5-054-865-11(1) Copyright 2023 Sony Corporation
To Next Page
Loading...
Need help?
General
