Sony a7CII User Manual

Help Guide
Interchangeable Lens Digital Camera
ILCE-7CM2 α7CII
Program Auto
Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value).
You can set shooting functions such as [
ISO].
Program Shift (only during still image shooting)
When you are not using a flash, you can change the shutter speed and aperture (F-value) combination without changing
the appropriate exposure set by the camera.
Turn the front dial/rear dial L to select the aperture value and shutter speed combination.
“
” on the screen changes to “ ” when you turn the front dial/rear dial L.
To cancel program shift, set the shooting mode to other than [Program Auto], or turn off the camera.
Note
According to the brightness of the environment, the program shift may not be used.
Set the shooting mode to another one than “P” or turn off the power to cancel the setting you made.
When the brightness changes, the aperture (F-value) and shutter speed also change while maintaining the shift amount.
TP1001150358
5-054-865-11(1) Copyright 2023 Sony Corporation
Set the Still/Movie/S&Q dial to the desired shooting mode.
If you select S&Q (slow-motion/quick-motion), you can select [S&Q Motion] or [
Time-lapse] on the [
Shoot Mode] screen.
1
Set the mode dial to P (Program Auto).
2
Set the shooting functions to your desired settings.
3
Adjust the focus and shoot the subject.
4
124

Sony a7CII Specifications

General

Effective Megapixels	33.0 MP
ISO Sensitivity	100-51200 (expandable to 50-204800)
Autofocus System	Fast Hybrid AF (phase-detection AF / contrast-detection AF)
Image Stabilization	5-axis in-body image stabilization
Continuous Shooting	Up to 10 fps
Dimensions	124.0 x 71.1 x 63.4 mm
Image Processor	BIONZ XR
Sensor Type	Full-frame CMOS
Video Recording	4K 60p
Viewfinder	0.39-type electronic viewfinder
LCD Screen	3.0-inch vari-angle touchscreen
Connectivity	Wi-Fi, Bluetooth, USB Type-C
Weight	514 g (with battery and memory card)
Memory Card Slots	1 (SD/SDHC/SDXC, UHS-II compatible)