Help Guide
Interchangeable Lens Digital Camera
ILCE-7CM2 α7CII
Bright Monitoring
Allows you to adjust the composition when shooting in dark environments. By extending the exposure time, you can
check the composition on the viewfinder/monitor even in dark locations such as under the night sky.
Note
During [Bright Monitoring], [Live View Display] will automatically switch to [Setting Effect OFF], and setting values such as
exposure compensation will not be reflected in the live view display. It is recommended that you use [Bright Monitoring] only in
dark locations.
[Bright Monitoring] will be automatically canceled in the following situations.
When the camera is turned off.
When the shooting mode is changed from P/A/S/M to a mode that is not P/A/S/M.
When the focus mode is set to other than manual focus.
When [Auto Magnifier in MF] is executed.
When [Focus Magnifier] is selected.
During [Bright Monitoring], the shutter speed may be slower than normal while shooting in dark locations. Also, because the
measured brightness range is expanded, the exposure may change.
Related Topic
Assigning frequently used functions to buttons and dials (Custom Key/Dial Set.)
Live View Display Set.
TP1001150426
5-054-865-11(1) Copyright 2023 Sony Corporation
MENU →
(Setup) → [Operation Customize] → [ Custom Key/Dial Set.] → assign the [Bright
Monitoring] function to the desired key.
1
In a still image shooting mode, press the key to which you assigned the [Bright Monitoring] function, and
then shoot an image.
The brightness due to [Bright Monitoring] will continue after shooting.
To return the monitor brightness to normal, press the key to which you assigned the [Bright Monitoring] function
once again.
2
To Next Page
Loading...
Need help?
General
