When [ Picture Profile] is set to PPLUT1-PPLUT4
[REC Control] can be used with external recorders/players that support the [REC Control] function.
When [Time Code Output] is set to [Off], you cannot set [REC Control].
Even when
(REC) is displayed, the external recorder/player may not work properly depending on the settings or status of
the recorder/player. Check if the external recorder/player works properly before use.
When [Time Code Output] is set to [On], images may not be output properly to the TV or recording device. In this case, set [Time
Code Output] to [Off].
It is not possible to output audio in 4 channels to other devices connected via HDMI.
TP1001167567
5-054-865-11(1) Copyright 2023 Sony Corporation
However, when [Rec. Media dur HDMI Output] is set to [Off(HDMI Only)], the video is output in 4K.*
To Next Page
Loading...
