In the following example, the functions listed below are registered to "My Dial," and [My Dial 1→2→3] is assigned to the
C1 (Custom 1) button.
Note
“My Dial” settings in which every dial/wheel is set to [Not set] are not recalled when you press the custom key. They are also
skipped in [My Dial 1→2→3].
Even if a dial/wheel has been locked using the [Dial / Wheel Lock] function, it will be unlocked temporarily when “My Dial” is
recalled.
Related Topic
Assigning frequently used functions to buttons and dials (Custom Key/Dial Set.)
TP1001166038
5-054-865-11(1) Copyright 2023 Sony Corporation
Operation part My Dial 1 My Dial 2 My Dial 3
Front dial Aperture
Creative Look Move AF Frame : Std
Rear dial L Shutter Speed W Balance (C Temp) Move AF Frame
: Std
Rear dial R
Exposure Comp. Focus Area Move AF Frame : L
Control wheel
ISO White Balance Not set
Press the C1 (Custom1) button.
The functions registered to [My Dial 1] will be assigned to the front dial, rear dial L, rear dial R, and control wheel.
The icons for the functions registered to [My Dial 1] are displayed in the lower part of the screen.
1.
Turn the control wheel to set the ISO value, turn the front dial to set the aperture value, turn the rear dial L to set the
shutter speed, and turn the rear dial R to set the exposure compensation.
2.
Press the C1 button again. The functions registered to [My Dial 2] will be assigned to the front dial, rear dial L, rear
dial R, and the control wheel.
3.
Turn the control wheel to set [
White Balance], turn the front dial to set [ Creative Look], turn the rear dial L to
set [W Balance (C Temp)], and turn the rear dial R to set [
Focus Area].
4.
Press the C1 button again, and change the setting values for the functions registered to [My Dial 3].5.
To Next Page
Loading...
Need help?
General
