Connecting the camera and smartphone without pairing
If you want to connect without pairing, you need to perform the Wi-Fi connection operation every time.
Note
[Smartphone Connection] cannot be executed when [Airplane Mode] is set to [On].
Up to 2 devices can be connected to the camera at the same time using Bluetooth communication.
Radio wave interference may occur as Bluetooth communications and Wi-Fi (2.4 GHz) communications use the same frequency
band. If your Wi-Fi connection is unstable, it may be improved by turning off the Bluetooth function of the smartphone.
The Bluetooth icon is not displayed when the touch function icons are displayed in the movie recording mode. To see the
Bluetooth icon, swipe the touch function icons left or right to hide the touch function icons.
Related Topic
Functions available with a smartphone (Creators' App)
Using a smartphone as a remote commander
Select on Cam & Send (transferring to a smartphone)
Cnct. while Power OFF (smartphone)
Reading location information from a smartphone
TP1001170366
5-054-865-11(1) Copyright 2023 Sony Corporation
On the camera, select MENU →
(Network) → [ Cnct./PC Remote] → [Smartphone Connection].1.
Press the
(Delete) button on the camera to switch to the SSID and password screen.2.
Open the Wi-Fi setting screen on your smartphone.3.
On the Wi-Fi setting screen on your smartphone, select the SSID displayed on the camera and enter the password.4.
Launch Creators' App on your smartphone and open the [Cameras] screen.5.
Select the
(Setup) button in the upper right corner of the [Cameras] screen, and then select [Connect only via Wi-
Fi].
6.
On the screen of Creators' App on your smartphone, select the product name of the camera (ILCE-7CM2).
The smartphone will connect to the camera.
7.
To Next Page
Loading...
Need help?
General
