Sony BVM-E251 - Page 30

Adjustment Using the Menus
30
[Function Switch]
1) The item is the same for [Area Marker 1].
[System Configuration](page 60)
[Network]
[Monitor ID]
[Group ID]
[Network Setting]
[IP Address]
[Subnet Mask]
[Default Gateway]
[Address]
[Protocol Setting]
[SDCP/SDAP Community]
[SDCP Port No]
[SDAP Port No]
[SDAP Broadcast]
[SDAP Broadcast Period]
[Acceptable IP Address]
[Reset Protocol Setting]
[Parallel Remote]
[Parallel Remote]
[1 Pin] to [8 Pin]
[Power]
[Sleep Mode]
[Power On Status]
[Default CH]
[On Screen Set]
[Input Information]
[Format]
[Position]
[CH No]
[Position]
[CH Name]
[Position]
[Scan Mode]
[Position]
[Closed Caption]
[Closed Caption]
[Type]
[Service 708]
[Service 608]
[OSD Level]
[Audio Level Meter]
[Audio CH]
[Position]
[Transparency]
[Peak Hold]
[Time Code]
[VITC/LTC]
[Position]
[Level]
[Over Range]
[ABL Notification]
[Password]
[Change Password]
[Apply Password]
[Adjustment]
[Channel Configuration]
[Auxiliary Setting]
[Function Setting]
[System Configuration]
[Individual Item]
[File Management]
[Controller]
[Key Protect]
[Date/Time]
[Scan Mode Skip]
[Screen Saver]
[License Management] (BVM-E171 only)
[Monitor Upgrade]
[Software Version]
[Kernel Version]
[FPGA Version]
[CPLD Version]
[Software Upgrade]
[Kernel Upgrade]
[FPGA Upgrade]
[Maintenance]
[File Management](page 66)
[Save To]
[External Memory]
[Copy From]
[Other Monitor]
[External Memory]
[Delete]
[External Memory]
[Data Maintenance]
[Back Up System Data]
[Restore System Data]
[System Status](page 68)
Displays the unit setting status, etc.
For details on the displayed items, see “[System Status]
Menu” (page 68).
[Controller](page 70)
[Network]
[Network Setting]
[IP Address]
[Subnet Mask]
[Default Gateway]
[Address]
[Protocol Setting]
[SDCP/SDAP Community]
[SDCP Port No]
[SDAP Port No]
[SDAP Broadcast]
[SDAP Broadcast Period]
[Reset Protocol Setting]
[Function Key]