Specifications
88
Handle (1)
Screws (6)
Before Using This Unit (1)
CD-ROM (1)
European Representative (1)
Optional accessories
BKM-17R/BKM-16R Monitor Control
Unit
BKM-39H Controller Attachment
Stand
SMF-17R20 Monitor Interface Cable
Design and specifications are subject to change without
notice.
Available Signal Formats
The unit is applicable to the following signal formats.
Composite
SD-SDI
Notes
Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
SONY WILL NOT BE LIABLE FOR CLAIMS OF
ANY KIND MADE BY USERS OF THIS UNIT
OR MADE BY THIRD PARTIES.
SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR DISCONTINUATION OF
ANY SERVICES RELATED TO THIS UNIT
THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND RESULTING FROM A FAILURE TO
IMPLEMENT PROPER SECURITY MEASURES
ON TRANSMISSION DEVICES, UNAVOIDABLE
DATA LEAKS RESULTING FROM
TRANSMISSION SPECIFICATIONS, OR
SECURITY PROBLEMS OF ANY KIND.
Depending on the operating environment,
unauthorized third parties on the network may be
able to access the unit. When connecting the unit to
the network, be sure to confirm that the network is
protected securely.
Signal System Signal Structure Quantization
720
2)
× 487/59.94/I NTSC 0/7.5 Limited
720
2)
× 487/59.94/I PAL-M Limited
720
2)
× 576/50/I PAL Limited
Signal System Signal Structure Quantization
720 × 487/59.94/I 4 : 2 : 2 (YCbCr) 10bit Limited
720 × 576/50/I 4 : 2 : 2 (YCbCr) 10bit Limited
To Next Page
Loading...
