Sony BVM-E251 - Page 57

Adjustment Using the Menus
57
[Aspect Marker] Sets whether or not to display the aspect
marker ([Off] or [On]).
Notes
 The aspect marker is not displayed
in the following cases:
– When the input signal has no sync
signal
– When the internal signal is
displayed
– When the HDMI computer signal
is input
– When [H Delay]/[V Delay] is set
to [On]
– When [Side by Side], [Wipe],
[Butterfly], or [Blending] is set to
[On]
– When [Pixel Zoom] is set to on
 The aspect marker may be displayed
in an incorrect position when
[External Sync] is [On].
[Area Marker 1]
[Area Marker 2]
Sets whether or not to display the area
marker 1 (area marker 2) ([Off] or
[On]).
Notes
 The area marker 1 (area marker 2) is
not displayed in the following cases:
– When the input signal has no sync
signal
– When the internal signal is
displayed
– When the HDMI computer signal
is input
– When [H Delay]/[V Delay] is set
to [On]
– When [Side by Side], [Wipe],
[Butterfly], or [Blending] is set to
[On]
– When [Pixel Zoom] is set to on
 The area marker may be displayed in
an incorrect position when [External
Sync] is [On].
Submenu Setting
[Center Marker] Sets whether or not to display the center
marker ([Off] or [On]).
Notes
 The center marker is not displayed
in the following cases:
– When the input signal has no sync
signal
– When the internal signal is
displayed
– When the HDMI computer signal
is input
– When [H Delay]/[V Delay] is set
to [On]
– When [Side by Side], [Wipe],
[Butterfly], or [Blending] is set to
[On]
– When [Pixel Zoom] is set to on
 The center marker may be displayed
in an incorrect position when
[External Sync] is [On].
[Aspect Marker-Line] Sets whether or not to display the line of
the aspect marker ([Off] or [On]).
Notes
 The line of the aspect marker is not
displayed in the following cases:
– When the input signal has no sync
signal
– When the internal signal is
displayed
– When the HDMI computer signal
is input
– When [H Delay]/[V Delay] is set
to [On]
– When [Side by Side], [Wipe],
[Butterfly], or [Blending] is set to
[On]
– When [Pixel Zoom] is set to on
 The line of the aspect marker may be
displayed in an incorrect position
when [External Sync] is [On].
Submenu Setting