Searching
for
a
track
Searching a
track
by
name
- Quick-BrowZer
You
can search for a track in a CD, USB device
or iPod easily
by
category.
Q (BROWSE)/CAT Multi way
encoder
~
(BACK)
1 Press Q (BROWSE)/CAT.
The unit enters the Quick-BrowZer mode,
and the list
of
search categories appears.
2 Rotate
the
multi way encoder
to
select
the desired search category, then
press
it
to
confirm.
_ 3 Repeat step 2
until
the desired track
is
selected.
Playback starts.
To
return
to
the previous display
Press
~
(BACK).
To
exit
the Quick-BrowZer mode
Press Q (BROWSE)/CAT.
Note
When entering the Quick-BrowZer mode, the repeat!
shuffle setting is canceled.
12
Searching by skip items
-Jump
mode
When many items are
in
a category, you can
search the desired item quickly.
1 Push the multi way encoder right,
in
Quick-
BrowZer mode.
The following display appears.
a.
Jump t10de
L...-...=;::;,r
==---'
oCurrent item number
o Total item number in the current layer
e Item name
Then the item name will appear.
2 Rotate the multi way encoder to select the
desired item, or one near the desired item.
It
skips in steps
of
10%
of
the total item
number.
3 Press the multi way encoder.
The display returns to the Quick-BrowZer
mode and the selected item appears.
4 Rotate the multi way encoder to select the
desired item and press it.
Playback starts if the selected item is a track.
To
cancel
Jump
mode
Press
~
(BACK) or push the multi way encoder
left.
Searching a
track
by
listening
to
track
passages -
ZAPPINTM
While playing back short track passages
in
a CD,
USB device or iPod
in
sequence, you can search
for a track you want to listen to.
ZAPPIN mode
is
suitable for searching for a
track
in
shuffle or shuffle repeat mode.
ZAP Multi way encoder
~
(BACK)
To Next Page
Loading...
