Display
items
Setting
the
play
mode
-
push and hold the multi way
encoder up/down.
Do
this
push the multi way encoder up/
down.
Skip
continuously
Skip
To
1
During
playback,
press
(MODE).
The mode changes as follows:
Album
Mode
--+
Track Mode
--+
Podcast Mode*
--+
Genre Mode
--+
Playlist Mode
--+
Artist
Mode
* May not appeardepending on iPod setting.
Skipping albums, podcasts, genres,
playlists and
artists
o Source (iPod) indication
e Clock
e Artist name/Album name, Track name,
Album number/Track number/Elapsed
playing time
To
change display items
e,
press
(
DSPUSCRL
).
Tip
When album/podcastlgenre/artistlplaylist is changed,
its item number appears momentarily.
Note
Some letters stored in iPod may not be displayed
correctly.
Removing the iPod
1 Stop the iPod playback.
2 Remove the iPod.
Caution
for
iPhone
When you connect
an
iPhone via USB, telephone
volume is controlled by iPhone itself.
In
order to avoid
sudden loud sound after
a call, do
not
increase the
volume on the unit during
a telephone call.
Note
This unit cannot recognize iPod via a USB hub.
Tips
• When the ignition key is turned to the
ACC
position,
and
the unit is on, the iPod will be recharged.
•
If
the iPod is disconnected during playback, "NO
Device" appears
in
the display
of
the unit.
* May not appear depending
on
iPod setting.
3
Adjust
the
volume.
Press
(OFF)
to stop playback.
The iPod will
tum
on automatically, and the
display will appear on the iPod screen as
below.*
The tracks on the iPod start playing
automatically from the point last played.
If
an iPod
is
already connected, to start
playback press
(SOURCE)
repeatedly until
"USB"
appears. ("iPod" appears
in
the
display when iPod is recognized.)
*
If
the iPod was played back in the passenger control
last time, this will
not
appear.
2 Press
(MODE)
to
select
the play mode.
The mode changes as follows:
Resuming Mode
--+
Album
Mode
--+
Track Mode
--+
Podcast Mode*
--+
Genre Mode
--+
Play
list
Mode
--+
Artist
Mode
Tip
We
recommend the RC-1001P USB cable (not
supplied) to connect the dock connector.
Resuming mode
When the iPod
is
connected to the dock
connector, the mode
of
this unit changes to
resuming mode and playback starts in the mode
set by the iPod.
In resuming mode, repeat/shuffle play does not
function.
17
To Next Page
Loading...
