Sony CDX-GT930UI - Adjusting Setup Menu Items

Adjusting setup items - MENU
1 Press and hold the multi way encoder.
2 Rotate the multi way encoder until the
desired menu item appears, then
press it.
3 Rotate the multi way encoder to select
the setting, then press it.
The setting is complete.
4 Push ~ (BACK).
The setting is complete and the display
returns to normal play/reception mode.
The following items can
be set (follow the page
reference for details):
iii Setup
Clock Adjust (page 6)
Beep
Activates the beep sound: "on," "off."
AUX Audio*1
Activates the AUX source display: "on," "off'
(page 21).
RM (Rotary Commander)
Changes the operative direction
of the rotary
_ commander controls: "NORM," "REV."
Auto Off
Shuts off automatically after a desired time
when the unit
is turned off: "NO," "30sec
(seconds)," "30m
in (minutes)," "60min
(minutes)."
• Display
Demo (Demonstration)
Activates the demonstration:
"on," "off."
Image
Sets various display images.
- "All": to display all images.
- "Movie": to display a movie.
- "SA I -
3, All": to display the Spectrum
Analyzer.
- "WaII.P I - 3, All": to display a wallpaper.
-
"off': to not display any image.
Information
Displays the items (depending on the source,
etc.): "on," "off."
Dimmer
Changes the display brightness.
- "Auto": to dim the display automatically when
you tum lights on. (Available only when the
illumination control lead
is connected.)
- "on": to dim the display.
-
"off': deactivate the dimmer.
20
illumination
Changes the illumination color: "Blue," "Red"
or "Green."
Auto Scroll
Scrolls long items automatically: "on," "off."
'" Play Mode
Local (Local Seek Mode)
- "on": to only tune into stations with stronger
signals.
-
"off': to tune normal reception.
Mono*2 (Monaural Mode)
Selects monaural reception mode to improve
poor PM reception:
"on," "off."
Zappin Time*3
Selects the playback time for the ZAPPIN
function.
-" I (about 6 seconds)," "2 (about 9 seconds),"
"3 (about 30 seconds)."
IF
- "Auto": to narrow automatically the reception
frequency to eliminate noise.
- "Wide"
*4: to always hear PM stereo
broadcasts
in stereo and with full the
frequency signal reception.
BTM (page 13)
*I When the unit is turned off.
*2 When
FM is received.
*3 When CDIUSBliPod source is activated.
*4 In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.