Sony CMT-G2NIP - Operations; Playing a CD;MP3 disc

28
GB
Operations
Playing a CD/MP3 disc
You can play audio CDs and CD-R/RW discs
recorded with MP3 audio tracks. See “On playable
discs” for details (page 70).
1
Press CD to select the CD
function.
2
Load a disc.
Press Z (OPEN/CLOSE) to open the tray,
place a disc on the tray (label side up), and
press Z (OPEN/CLOSE) to close the tray.
3
Press N to start playback.
Other operations
To Do the following:
Pause playback Press X (pause). To resume
play, press X again.
Stop playback Press x (stop).
Select a folder on an
MP3 disc
Press (folder) +/–
repeatedly.
Select a track or file Press . (skip
backward)/> (skip
forward).
Search a folder and
file on a MP3 disc
Press BACK during
playback, press M/m to
select the desired folder,
then press ENTER. Press
M/m to select the desired
file, then press ENTER.
Find a point in a track
or file
Hold down m (search
backward)/M (search
forward) during playback,
and release at the desired
point.
Select Repeat Play Press REPEAT repeatedly
until “REP” or “REP1”
lights up (page 50).
Select Shuffle Play or
Program Play
While playback is stopped,
press PLAY MODE
repeatedly until the desired
play mode (“SHUF,”
“PGM,” etc.) lights up
(page 50).