30
GB
Listening to the radio
You can tune in FM stations, AM stations, or
DAB/DAB+ stations (CMT-G2BNiP only).
Presetting stations in advance allows you to recall
them by number.
Note that the DAB/DAB+ tuning is only available
for CMT-G2BNiP.
Tuning in a radio station
The DAB/DAB+ tuning is only available for
CMT-G2BNiP.
Before tuning in DAB/DAB+ stations, make sure
that the DAB Initial Scan has been performed and
a service component list has been stored on the
system.
1
Press TUNER repeatedly to select
“TUNER DAB,” “TUNER FM” or
“TUNER AM.”
2
Perform tuning.
For automatic tuning:
Press TUNING MODE repeatedly until
“AUTO” lights up, then press +/–. Scanning
stops automatically when a station is tuned
in, and “TUNED” and “ST”(for stereo
programs only) light up on the display.
If “TUNED” does not light up and scanning
for an FM/AM station does not stop, press x
to stop scanning, then perform manual
tuning.
For manual tuning (FM/AM only):
Press TUNING MODE repeatedly until
“AUTO” and “PRESET” go out, then press
+/– repeatedly to tune in the desired station.
For preset tuning:
Press TUNING MODE repeatedly until
“PRESET” lights up, then press +/–
repeatedly to select the desired preset
number. For details on presetting stations, see
“Presetting radio stations” (page 31).
To Next Page
Loading...
Need help?
General
