Sony CMT-G2NIP - Playing in Random Order or Programmed Order; Creating Your Own Program

51
GB
Operations
Playing in random order
or programmed order
1
While playback is stopped, press
PLAY MODE repeatedly to select
the desired play mode.
The play mode changes as follows:
Normal t “” t “SHUF” t
“ SHUF” t “PGM” (CD function only)
t Normal
2
Press N.
Playback starts in the selected play mode.
To cancel Shuffle or Program Play mode
While playback is stopped, press PLAY MODE
repeatedly to select normal play mode.
Creating your own
program
You can program up to 25 tracks or files.
Note that only the CD function is available for
creating a program.
1
Press CD to select the CD
function.
2
While playback is stopped, press
PLAY MODE repeatedly until
“PGM” lights up.
The program display appears.
3
Press ./> repeatedly to
select the desired track or file
number.
When programming audio files, press +/–
repeatedly to select the desired folder, and
then select the desired file.
A Selected track or file number
B Total playing time of the selected track or file
4
Press ENTER to add the track or
file to the program.
5
Repeat steps 3 and 4 to add other
tracks or files.
6
Press N to start Program Play.
The program remains available until you
open the disc tray.
To play the same program again, press N.
To cancel Program Play
While playback is stopped, press PLAY MODE
repeatedly until “PGM” goes out.
To delete the last track or file of the program
While playback is stopped, press CLEAR.