47
GB
Operations
2
Select “CMT-G2NiP” on the
AirPlay menu of iTunes or your
iOS device.
[iOS device]
[iTunes]
3
Start playing back audio content
on an iOS device or on iTunes.
AirPlay is selected as a function of the system
automatically.
Tip
If the playback does not start, perform the process again
from step 1.
To confirm/edit the device name
1
Press AirPlay to select the AirPlay
function.
2
Press OPTIONS.
3
Press M/m to select “Device name.”
The device name that is displayed on the iOS
device or iTunes appears.
Refer to “Renaming the unit” (page 55) for
instructions on how to rename the device.
To control AirPlay playback
You can use the VOLUME+/–, N, X, x, .,
and > buttons. Operation from the system and
the remote is active only when the system is
selected as the device for output.
When you use iTunes, set an iOS device to accept
control from this system and the remote when you
want to use this system and the remote to operate
an iOS device.
Tips
• The most recent control command to the system is
given priority. The system starts playing back audio
content of another device when it accepts control from
that AirPlay-equipped device, even if this system is
being used for AirPlay with the original device.
• The very loud sound may output from this system when
you set the volume too loud using iOS devices or
iTunes.
• The PLAY MODE button and the REPEAT button on
the remote do not work when the iPod&iPhone is
selected as the function.
• For details on the use of iTunes, refer to the Help of
iTunes.
• The volume level of iOS devices or iTunes may not be
able to be linked with the volume level of this system.
To Next Page
Loading...
Need help?
General
