7
GB
Before you begin
Printer rear panel
1 Handle
As illustrated below, raise the handle
when you bring the printer.
When you use the printer, close it to its
original position.
Notes
• When you bring the printer, make sure
to remove memory cards, external
device, and paper tray. Otherwise
malfunctions may occur.
• When using the DPP-FP90, set the LCD
panel to its original position.
2 Ventilation holes
3 DC IN 24V jack (.Read This First)
Connect the supplied AC power adaptor
into this connector.
Printer left side panel
4 USB connector (page 41)
When using the printer in PC mode,
connect a PC into this connector.
5 PictBridge/EXT INTERFACE
connector (pages 35 to 38)
When using a PictBridge-compliant
digital camera, a mass-storage device
such as a USB memory or photo storage,
Bluetooth USB adaptor (DPPA-BT1*), or
other external USB device, connect it into
this connector.
(*In some regions, the Bluetooth USB
adaptor DPPA-BT1 is not sold.)
To Next Page
Loading...
Need help?
General
