Sony DPP-FP70 - Page 76

76
GB
Maximum number of pixels to be
handled
8 000(H) x 6 000(V) dots
(Excluding Index Print and part of
Creative Print)
Maximum number of files to be handled
9 999 files for a memory card/an
external device
Ink ribbon/Print Paper
See supplied “Read This First”.
LCD screen
LCD panel:
DPP-FP70: 6.2 cm (2.5 type) TFT
drive
DPP-FP90: 9.0 cm (3.6 type) TFT
drive
Total number of dots:
DPP-FP70: 115 200 (480 x 240)
DPP-FP90: 230 400 (320 RGB x 240)
Power requirements
DC IN jack, DC 24V
Power consumption
While printing: 80 W (maximum)
On standby mode: less than 1W
Operating temperature
5 ˚C to 35 ˚C (41 ˚F to 95 ˚F)
Dimensions
[DPP-FP70]
Height: Approx. 63 mm
( 2
1
/
2
inches) (printer)
Approx. 72 mm
( 2
7
/
8
inches) (including
LCD projecting parts)
Width: Approx. 180 mm
( 7
1
/
8
inches)
Depth: Approx. 137 mm
( 5
1
/
2
inches) (excluding
a handle)
Approx. 149 mm
( 5
7
/
8
inches)
(including a handle)
[DPP-FP90]
Height: Approx. 66 mm
( 2
5
/
8
inches)
Width: Approx. 180 mm
( 7
1
/
8
inches)
Depth: Approx. 137 mm
( 5
1
/
2
inches)
(excluding a handle)
Approx. 149 mm
( 5
7
/
8
inches)
(including a handle)
Depth when the paper tray is
installed: Approx. 169 mm ( 6
3
/
4
inches) longer than the above depth.
Mass
DPP-FP70: Approx. 1.1 kg (2 lb 7 oz)
DPP-FP90: Approx. 1.2 kg (2 lb 10 oz)
(excluding the paper tray, ink ribbon,
AC power adaptor)
Supplied accessories
See supplied “Read This First”.
x AC power adaptor AC-S2422
Power requirements
AC 100V to 240 V, 50/60 Hz,
1.5A to 0.75 A
Rated output voltage
DC 24 V, 2.2 A (Peak 3.7 A, 6.5 s)
Operating temperature
5 ˚C to 35 ˚C (41 ˚F to 95 ˚F)
Dimensions
Approx. 60 x 30.5 x 122 mm
(2
3
/
8
x 1
1
/
4
x 4
7
/
8
inches)
(w/h/d, excluding protruding parts
and cables)
Mass
Approx. 305 g (11 oz)
Design and specifications are subject to
change without notice.