137
Printing images
To cancel the print
During printing, pressing the center of the controller cancels the print.
Remove the USB cable or turn off the camera. When you want to print
again, follow the procedure (Stages 1 to 3) above.
Page 1
Print
Prints the selected images. For details, see “Stage 3: Printing.”
Set print q’ty
You can specify the number of prints, up to 20. The same number of prints is specified
on all the selected images.
Paper size
PictBridge menu
Auto Printer setup
9×13cm/3.5"×5" 89×127 mm
Hagaki 100×147 mm
10×15cm 10×15 cm
4"×6" 101.6×152.4 mm
A6/4.1"×5.8" 105×148.5 mm
13×18cm/5"×7" 127×178 mm
Letter 216×279.4 mm
A4/8.3"×11.7" 210×297 mm
A3/11.7"×16.5" 297×420 mm
To Next Page
Loading...
