Sony EV-S900 - PCM Recording Operation

PCM
Recording
and
Sar es
Track 6
Track 5
Track 4
Track 3
Track 2
Track 1
Playback
—
Digital
Multi
Audio
System
Normally both the video and audio signals are recorded
on your video tape. However, in digital multi audio
recording the full width of the tape will be divided into
six tracks (Track number 1 to 6) and you can record only
audio signafs on each track in stereo. [1-7]
Up to 4hour recording can be made on each eck
which allows up to 24-hour continuous PCM recording
with one cassette tape (with P8-120 cassette on LP
mode).
‘Recording te
1 Insert a cassette.
2 Select the tape speed (SP or LP).
3 Set PCM MODE to either DIGITAL MULTI S or P
position.
(Either will do.)
Display window Automatically appears.
Track number
4 Set LINE to LINE 1 or LINE 2 according to the
line inputs connected to an audio system.
5 Select the track on which audio recording should
be made.
— Press TRACK/CH +/~.
or :
— Press TRACK/CH/INDEX and then turn JOG.
Track number
Move to the desired track.
6 Turn on the power of an audio system and set
it to playback mode.
7 Adjust REC LEVEL.
See “Recording level adjustment” on page 28.
8 Press the @ REC buttons.
27