Sony HDVF-C950W - Brightness Final Adjustment

HDVF-C950W
3-3 (E)
(3) Switch the ADJUST GAIN R/G/B and adjust
them so that the color temperature in the center of
the screen meets specifications.
n
During this adjustment, either R, G, or B should
be fixed to 64, and the remaining two parameters
should be set no higher than 64.
Setting MENU : SERVICE
PAGE : S02OCOLOR TEMP
ITEM : ADJUST GAIN R
: ADJUST GAIN G
: ADJUST GAIN B
Measurement equipment : Display color analyzer
Measurement point : Center of the screen
Specifications : x = 0.3133 ±0.003
: y = 0.3297 ±0.003
3. Repeat steps 1 and 2 until the color temperature
completely meets the specifications.
3-5. Brightness Final Adjustment
1. Set the controls and menus to the following settings.
1 BRIGHT knob : 99 (Turned fully clockwise)
2 CONTRAST knob : 99 (Turned fully clockwise)
3 MENU : SERVICE
PAGE : S05OFUNCTION 2
ITEM : TEST LEVEL → 255
2. Adjust the BL DIMMER so that the brightness in the
center of the screen meets specifications.
Setting MENU : SERVICE
PAGE : S01OADJUST
ITEM : BL DIMMER
Measurement equipment : Display color analyzer
Measurement point : Center of the screen
Specifications : 350 (+10/_0) cd/m
2