1-1 (E)
HDVF-C950W
Section 1
Service Overview
1-1. Board Layout 1-2. Matching Connectors and Cables
Use the included VF connection cable when connecting to
the camera for installation or servicing.
1-2-1. Cable Input/Output Signals
The VF connection cable input/output signals are as
follows.
. CAMERA (20-pin Male)
(External view)
No. Signal I/O Specifications
1 S-DATA IN/OUT TTL level
2 NC No connection
3 POWER OFF IN ON : OPEN
OFF : GND
4 SCK IN TTL level
5 COLOR/MONO OUT MONO : GND
COLOR : OPEN
6 NC No connection
7 NC No connection
8 G TALLY IN ON : +5 V
OFF : GND
9 PEAKING CTL OUT 0 V to +5 V
0 V : PEAKING OFF
+5 V : PEAKING MAX
10 NC No connection
11 NC No connection
12 Y VIDEO IN 1.0 Vp-p, Zi=75 Z
13 VIDEO GND _ GND for VIDEO
14 Pb VIDEO IN 0.7 Vp-p, Zi=75 Z
15 Pr VIDEO IN 0.7 Vp-p, Zi=75 Z
16 NC No connection
17 R TALLY IN ON : +5 V
OFF : GND
18 NC No connection
19 UNREG GND _ GND for UNREG
20 UNREG IN +10.5 V to 17 V
VR-315
SW-1298
PR-292
RE-237
LE-317
LE-315
SW-1299
LE-316
To Next Page
Loading...
