Notes
• You cannot do recording on the DVD recorder 02"
VCR via this receiver. For details, refer to the
operating instructions supplied with the DVD
recorder or V(R.
• To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
• As this receiver does not have analog audio input
jack for DVD, connect your DVD player to the
DIGITAL COAX IN DVD jack on the receiver.
To output sound from the front left/right speakers
and sub woofer only, press 2CH.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
20_8
To Next Page
Loading...
