54
GB
Preventing Accidental Operation —
HOLD function
Slide the HOLD switch in the direction of the
arrow. “HOLD” will flash three times, indicating
that all the functions of the buttons are locked.
When the HOLD function is activated during
stop, all the display will be turned off after
“HOLD” flashes three times.
To cancel the HOLD function
Slide the HOLD switch in the opposite direction.
Note
When the HOLD function is activated during recording, cancel the HOLD
function first to stop recording.
1 Tip
Even if the HOLD function is activated, you can stop the alarm playback. To
stop the alarm or playback, press STOP. (You cannot stop usual playback.)
HOLD switch
To Next Page
Loading...
