Help Guide
Interchangeable Lens Digital Camera
ILCE-9M3 α9III
Circ. of Focus Point (still image/movie)
Sets whether to allow the focusing frame to jump from one end to the other when you move the focusing frame. This
function is useful when you want to move the focusing frame from one end to the other quickly.
The function can be used when the following settings are selected for [ Focus Area].
[Zone]
[Spot: XL]/[Spot: L]/[Spot: M]/[Spot: S]/[Spot: XS]
[Expand Spot]
[Custom 1] - [Custom 3]
[Tracking: Zone]
[Tracking: Spot XL]/[Tracking: Spot L]/[Tracking: Spot M]/[Tracking: Spot S]/[Tracking: Spot XS]
[Tracking: Expand Spot]
[Tracking: Custom 1] - [Tracking: Custom 3]
Menu item details
Does Not Circulate:
The cursor does not move when you try to move the focusing frame past the end.
Circulate:
The cursor jumps to the opposite end when you try to move the focusing frame past the end.
Note
Even if you set [ Circ. of Focus Point] to [Circulate], the focusing frame will not circulate diagonally.
Related Topic
Selecting the focus area (Focus Area)
TP1001166026
MENU → (Focus) → [Focus Area] → [ Circ. of Focus Point] → desired setting.
When [Circulate] is selected:
1
To Next Page
Loading...
