Sony ILCE-9M3 - Pixel Mapping

Help Guide
Interchangeable Lens Digital Camera
ILCE-9M3 α9III
Pixel Mapping
You can manually optimize the image sensor (pixel mapping). If [Auto Pixel Mapping] is set to [Off], perform [Pixel
Mapping] regularly according to the following procedure. We recommend that you perform the operation once every three
days.
Hint
If you see bright spots in a recorded image on the camera monitor, immediately perform [Pixel Mapping].
Note
Pixel mapping cannot be performed when the battery is low.
If [Pixel Mapping] is not performed regularly, bright spots may appear in recorded images.
Related Topic
Auto Pixel Mapping
TP1001167568
5-056-662-11(1) Copyright 2023 Sony Corporation
MENU → (Setup) → [Setup Option] → select [Pixel Mapping].
1
Select [OK] on the confirmation screen.
Pixel mapping will be performed.
The camera cannot be operated during pixel mapping.
The camera will restart when pixel mapping is complete.
2
540