Help Guide
Interchangeable Lens Digital Camera
ILCE-9M3 α9III
Marker Display (movie)
While shooting movies, you can set whether or not to display markers on the monitor or the viewfinder, and select the
types of marker.
Menu item details
Marker Display:
Sets whether or not to display markers. ([On] / [Off])
Center Marker:
Sets whether or not to display the center marker in the middle of the shooting screen. ([Off] / [On])
Aspect Marker:
Sets the aspect marker display. ([Off] / [9:16] / [4:5] / [1:1] / [4:3] / [13:9] / [14:9] / [15:9] / [17:9] / [1.66:1] / [1.85:1] /
[1.91:1] / [2:1] / [2.35:1] / [2.39:1])
Safety Zone:
Sets the safety zone display. This becomes the standard range that can be received by a general household TV. ([Off] /
[80%] / [90%])
Guideframe:
Sets whether or not to display the guide frame. You can verify whether the subject is level or perpendicular to the ground.
([Off] / [On])
Hint
You can display several markers at the same time.
Position the subject at the cross point of [Guideframe] to ensure a balanced composition.
Note
The markers are displayed when the Still/Movie/S&Q dial is set to (Movie) or S&Q (S&Q Motion), or when shooting movies.
You cannot display markers when using [Focus Magnifier].
The markers are displayed on the monitor or viewfinder. (You cannot output the markers.)
TP1001150417
5-056-662-11(1) Copyright 2023 Sony Corporation
MENU → (Shooting) → [Marker Display] → Select a menu item and set the desired parameter.
1
To Next Page
Loading...
