Help Guide
Interchangeable Lens Digital Camera
ILCE-9M3 α9III
Save/Load Settings
You can save/load camera settings to/from a memory card or to/from the cloud (C3 Portal). You can also load settings
from another camera of the same model.
A service contract is required to use C3 Portal.
If you want to use the cloud to save/load a setting file, connect the camera to the smartphone application Creators’ App
for enterprise in advance.
For details on Creators’ App for enterprise, refer to the following website.
https://helpguide.sony.net/promobile/c3p_app/v1/en/index.html
Menu item details
Load:
Loads settings from a memory card or from the cloud to this camera.
Save:
Saves the current settings of this camera to a memory card or to the cloud.
Delete:
Deletes the settings saved on a memory card.
Settings that cannot be saved
The following setting parameters cannot be saved using the [Save/Load Settings] function. (Menu items without setting
parameters, such as, [Focus Magnifier], are not listed.)
(Shooting)
IPTC Information
Copyright Info
(Exposure/Color)
External Flash Set.
White Balance: Custom 1/Custom 2/Custom 3
(Focus)
Face Memory
(Network)
FTP Transfer Func.*
WPS Push
Access Point Set.
Wi-Fi Frequency Band
IP Address Setting
MENU → (Setup) → [Reset/Save Settings] → [Save/Load Settings] → desired item.
When you perform [Load] or [Save], select [Media]/[Cloud(Private)]/[Cloud(Share)] as the loading source or save
destination of the setting file.
1
To Next Page
Loading...
